SDM230Modbus is an advanced digital single phase multi-function energy meter, which measures up to 100A direct load. The SDM230modbus has 15 measured parameters and 4 different kWh measurment modes which has been designed around the development of regeneration, such as solar and battery storage. The means the pulsed output can be configured for the following.

• Import +Export = Total kWh
• Export - Import =Total kWh (Nett)
• Import = Total kWh
• Export = Total kWh 

A  communication port is provided, RS485 Modbus RTU or M-bus EN13757-3 and Communication parameters are password protected in the setup mode. The SDM230-2T can measure energy from two different power supplies acting as a dual tarriff meter.

Datasheet (EN)

Manual (EN)

MID CERTIFICATE (EN)

PROTOCOL SPECIFICATION (EN)