Brand Name: M5StackAccessory Type: Extension BoardCompatible With: M5Stack
Description
ATOM SWITCH is a bi-directional control programable switch for the M5ATOM. It can be connected to bi-directional AC circuits for simultaneous on-off control. The on-board relay can support up to 250V / 10A AC(Instantaneous current 16A). Built in step-down module can provide 5V / 1A DC power supply for ATOM. In order to ensure safe use, its DC circuit has overheating and short circuit protection functions. In order to facilitate the use of users in industrial scenarios, an SP485EE level-conversion IC is built in. There are also a set of RS485 interfaces provided for the user to connect RS485 equipment.RS485 has the ability to supply power to ATOM, the support voltage is 9-24V. In addition, a set of PH2.0 interfaces is also provided for connecting I2C peripheral equipment or general I/O equipment. With the Bluetooth and WiFi functions of M5ATOM, you can easily setup a remote control switch. If you have multiple M5ATOM HUB SWITCH modules, you can set them up in parallel through the RS485 interface.
Product Features
- Compatible ATOM Matrix/ATOM Lite
- Built-in AC-DC circuit
- 2-way relay
- Built-in RS485 level-conversion, supporting Modbus
- PH2.0 port extend
- Short circuit protection
- Remote control via Bluetooth, WiFi and RS485
Include
- 1x ATOM SWITCH
- 1x ATOM Lite
- 4x Magnet
- 1x Magnet double-side tape
- 1x DIN Rail
- 1x 3.96*4P plug
- 3x 3.96*3P plug
- 1x M4 Hex Key
- 2x M4*10mm Hexagon countersunk screw
- 1x M2*20mm Hexagon socket cup head machine screw
Applications
- Intelligent switch
Specification
M5Stack Docs Link
https://docs.m5stack.com/#/en/atom/atomhub_switch
CoreInk is a brand new E-ink display in the M5Stack cores range. Controlled by the ESP32-PICO-D4 This new device includes a 200x200 1.54" Black and White E-Ink Display. Compared to a regular LCD，E-ink displays are easier on the eyes, which makes them a great choice for reading or viewing for longer periods. Other benefits are the low power consumption and the ability to retain the image even if power to the display is terminated。For control the CoreInk integrates an multi-function button,A physical button, integrated status LED and buzzer.The device also includes a 390mAh Lipo，RTC(BM8563)for controlling accurate timing and deep sleep funcionality. CoreInk features independent reset and power buttons，expansion ports(HY2.0-4P、M-BUS、HAT expansion)for attaching external sensors to expand functionailty，for unlimited possibilities。
Warning
Please avoid using high refresh rates，reccommended refresh rate is(15s/per refresh), Do not expose to ultraviolet rays for a long time, otherwise it may cause irreversible damage to the ink screen.
- ESP32 Standard wireless functions WiFi、Bluetooth
- Internal 4M Flash
- Low Power Display
- 180 degree viewing angle
- Expansion ports
- Built-in Magnet
- Internal Battery
- Expandable
Includes
- 1x CoreInk
- 1x Type-C USB(20cm)
Application
- IoT Terminal
- E-Book
- Industrial Control Panel
- Electronic Tag
More Information
https://docs.m5stack.com/#/en/core/coreink
M5StickC PLUS is powered by ESP32-PICO-D4 with Bluetooth 4.0 and WiFi and is an upgrade of the original M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich your creativity, and speed up your IoT prototying. Developing with M5StickC PLUS takes away a lot of the pains from the development process. M5StickC Plus is one of the core devices in M5Stacks product series. The compact body is integrated with rich hardware resources, such as infrared, RTC, Microphone, LED, IMU, Buttons, PMU,etc. Improvements from the regular StickC are a buzzer, bigger screen (1.14-inch, 135 * 240 resolution LCD Screen) and more stable hardware design. This revision increases the display area by 18.7%, and the battery capacity from 95mAh to 120mAh. It also supports the HAT and Unit family of products.
Power switch operation：
- Power on ：Press power button for 2 seconds
- Power off ：Press power button for 6 seconds
- ESP32-based support BLE 4.2 and WiFi
- Built-in 6-Axis IMU
- Red LED
- IR transmitter
- Microphone
- RTC
- Buttons, LCD(1.14 inch)
- Built-in Lipo Battery
- Extendable Socket
- Built-in Passive Buzzer
- Wearable & Wall mounted
- Development Platform UIFlow, MicroPython, Arduino
- 1x M5StickC Plus
- Internet of things terminal controller
- Wearable devices
- Stem education product
- DIY creation
More information
https://docs.m5stack.com/#/en/core/m5stickc_plus
You can view your wishlist by creating account or logging-in an existing account.
Logging you in
